# -*- text -*- ## ## radiusd.conf -- FreeRADIUS server configuration file - 3.0.21 ## ## http://www.freeradius.org/ ## $Id: e8aee3c00193127177cd65e31156c1d0f4b124d3 $ ## ###################################################################### # # The format of this (and other) configuration file is # documented in "man unlang". There are also READMEs in many # subdirectories: # # raddb/README.rst # How to upgrade from v2. # # raddb/mods-available/README.rst # How to use mods-available / mods-enabled. # All of the modules are in individual files, # along with configuration items and full documentation. # # raddb/sites-available/README # virtual servers, "listen" sections, clients, etc. # The "sites-available" directory contains many # worked examples of common configurations. # # raddb/certs/README # How to create certificates for EAP or RadSec. # # Every configuration item in the server is documented # extensively in the comments in the example configuration # files. # # Before editing this (or any other) configuration file, PLEASE # read "man radiusd". See the section titled DEBUGGING. It # outlines a method where you can quickly create the # configuration you want, with minimal effort. # # Run the server in debugging mode, and READ the output. # # $ radiusd -X # # We cannot emphasize this point strongly enough. The vast # majority of problems can be solved by carefully reading the # debugging output, which includes warnings about common issues, # and suggestions for how they may be fixed. # # There may be a lot of output, but look carefully for words like: # "warning", "error", "reject", or "failure". The messages there # will usually be enough to guide you to a solution. # # More documentation on "radiusd -X" is available on the wiki: # https://wiki.freeradius.org/radiusd-X # # If you are going to ask a question on the mailing list, then # explain what you are trying to do, and include the output from # debugging mode (radiusd -X). Failure to do so means that all # of the responses to your question will be people telling you # to "post the output of radiusd -X". # # Guidelines for posting to the mailing list are on the wiki: # https://wiki.freeradius.org/list-help # # Please read those guidelines before posting to the list. # # Further documentation is available in the "doc" directory # of the server distribution, or on the wiki at: # https://wiki.freeradius.org/ # # New users to RADIUS should read the Technical Guide. That guide # explains how RADIUS works, how FreeRADIUS works, and what each # part of a RADIUS system does. It is not just "configure FreeRADIUS"! # https://networkradius.com/doc/FreeRADIUS-Technical-Guide.pdf # # More documentation on dictionaries, modules, unlang, etc. is also # available on the Network RADIUS web site: # https://networkradius.com/freeradius-documentation/ # ###################################################################### prefix = /usr exec_prefix = /usr sysconfdir = /etc localstatedir = /var sbindir = /usr/sbin logdir = ${localstatedir}/log/radius raddbdir = ${sysconfdir}/raddb radacctdir = ${logdir}/radacct # # name of the running server. See also the "-n" command-line option. name = radiusd # Location of config and logfiles. confdir = ${raddbdir} modconfdir = ${confdir}/mods-config certdir = ${confdir}/certs cadir = ${confdir}/certs run_dir = ${localstatedir}/run/${name} db_dir = ${localstatedir}/lib/radiusd # # libdir: Where to find the rlm_* modules. # # This should be automatically set at configuration time. # # If the server builds and installs, but fails at execution time # with an 'undefined symbol' error, then you can use the libdir # directive to work around the problem. # # The cause is usually that a library has been installed on your # system in a place where the dynamic linker CANNOT find it. When # executing as root (or another user), your personal environment MAY # be set up to allow the dynamic linker to find the library. When # executing as a daemon, FreeRADIUS MAY NOT have the same # personalized configuration. # # To work around the problem, find out which library contains that symbol, # and add the directory containing that library to the end of 'libdir', # with a colon separating the directory names. NO spaces are allowed. # # e.g. libdir = /usr/local/lib:/opt/package/lib # # You can also try setting the LD_LIBRARY_PATH environment variable # in a script which starts the server. # # If that does not work, then you can re-configure and re-build the # server to NOT use shared libraries, via: # # ./configure --disable-shared # make # make install # libdir = /usr/lib64/freeradius # pidfile: Where to place the PID of the RADIUS server. # # The server may be signalled while it's running by using this # file. # # This file is written when ONLY running in daemon mode. # # e.g.: kill -HUP `cat /var/run/radiusd/radiusd.pid` # pidfile = ${run_dir}/${name}.pid # # correct_escapes: use correct backslash escaping # # Prior to version 3.0.5, the handling of backslashes was a little # awkward, i.e. "wrong". In some cases, to get one backslash into # a regex, you had to put 4 in the config files. # # Version 3.0.5 fixes that. However, for backwards compatibility, # the new method of escaping is DISABLED BY DEFAULT. This means # that upgrading to 3.0.5 won't break your configuration. # # If you don't have double backslashes (i.e. \\) in your configuration, # this won't matter to you. If you do have them, fix that to use only # one backslash, and then set "correct_escapes = true". # # You can check for this by doing: # # $ grep '\\\\' $(find raddb -type f -print) # correct_escapes = true # panic_action: Command to execute if the server dies unexpectedly. # # FOR PRODUCTION SYSTEMS, ACTIONS SHOULD ALWAYS EXIT. # AN INTERACTIVE ACTION MEANS THE SERVER IS NOT RESPONDING TO REQUESTS. # AN INTERACTICE ACTION MEANS THE SERVER WILL NOT RESTART. # # THE SERVER MUST NOT BE ALLOWED EXECUTE UNTRUSTED PANIC ACTION CODE # PATTACH CAN BE USED AS AN ATTACK VECTOR. # # The panic action is a command which will be executed if the server # receives a fatal, non user generated signal, i.e. SIGSEGV, SIGBUS, # SIGABRT or SIGFPE. # # This can be used to start an interactive debugging session so # that information regarding the current state of the server can # be acquired. # # The following string substitutions are available: # - %e The currently executing program e.g. /sbin/radiusd # - %p The PID of the currently executing program e.g. 12345 # # Standard ${} substitutions are also allowed. # # An example panic action for opening an interactive session in GDB would be: # #panic_action = "gdb %e %p" # # Again, don't use that on a production system. # # An example panic action for opening an automated session in GDB would be: # #panic_action = "gdb -silent -x ${raddbdir}/panic.gdb %e %p 2>&1 | tee ${logdir}/gdb-${name}-%p.log" # # That command can be used on a production system. # # max_request_time: The maximum time (in seconds) to handle a request. # # Requests which take more time than this to process may be killed, and # a REJECT message is returned. # # WARNING: If you notice that requests take a long time to be handled, # then this MAY INDICATE a bug in the server, in one of the modules # used to handle a request, OR in your local configuration. # # This problem is most often seen when using an SQL database. If it takes # more than a second or two to receive an answer from the SQL database, # then it probably means that you haven't indexed the database. See your # SQL server documentation for more information. # # Useful range of values: 5 to 120 # max_request_time = 30 # cleanup_delay: The time to wait (in seconds) before cleaning up # a reply which was sent to the NAS. # # The RADIUS request is normally cached internally for a short period # of time, after the reply is sent to the NAS. The reply packet may be # lost in the network, and the NAS will not see it. The NAS will then # re-send the request, and the server will respond quickly with the # cached reply. # # If this value is set too low, then duplicate requests from the NAS # MAY NOT be detected, and will instead be handled as separate requests. # # If this value is set too high, then the server will cache too many # requests, and some new requests may get blocked. (See 'max_requests'.) # # Useful range of values: 2 to 30 # cleanup_delay = 5 # max_requests: The maximum number of requests which the server keeps # track of. This should be 256 multiplied by the number of clients. # e.g. With 4 clients, this number should be 1024. # # If this number is too low, then when the server becomes busy, # it will not respond to any new requests, until the 'cleanup_delay' # time has passed, and it has removed the old requests. # # If this number is set too high, then the server will use a bit more # memory for no real benefit. # # If you aren't sure what it should be set to, it's better to set it # too high than too low. Setting it to 1000 per client is probably # the highest it should be. # # Useful range of values: 256 to infinity # max_requests = 16384 # hostname_lookups: Log the names of clients or just their IP addresses # e.g., www.freeradius.org (on) or 206.47.27.232 (off). # # The default is 'off' because it would be overall better for the net # if people had to knowingly turn this feature on, since enabling it # means that each client request will result in AT LEAST one lookup # request to the nameserver. Enabling hostname_lookups will also # mean that your server may stop randomly for 30 seconds from time # to time, if the DNS requests take too long. # # Turning hostname lookups off also means that the server won't block # for 30 seconds, if it sees an IP address which has no name associated # with it. # # allowed values: {no, yes} # hostname_lookups = no # # Logging section. The various "log_*" configuration items # will eventually be moved here. # log { # # Destination for log messages. This can be one of: # # files - log to "file", as defined below. # syslog - to syslog (see also the "syslog_facility", below. # stdout - standard output # stderr - standard error. # # The command-line option "-X" over-rides this option, and forces # logging to go to stdout. # destination = syslog # # Highlight important messages sent to stderr and stdout. # # Option will be ignored (disabled) if output if TERM is not # an xterm or output is not to a TTY. # colourise = yes # # The logging messages for the server are appended to the # tail of this file if destination == "files" # # If the server is running in debugging mode, this file is # NOT used. # file = ${logdir}/radius.log # # Which syslog facility to use, if ${destination} == "syslog" # # The exact values permitted here are OS-dependent. You probably # don't want to change this. # syslog_facility = daemon # Log the full User-Name attribute, as it was found in the request. # # allowed values: {no, yes} # stripped_names = no # Log all (accept and reject) authentication results to the log file. # # This is the same as setting "auth_accept = yes" and # "auth_reject = yes" # # allowed values: {no, yes} # auth = yes # Log Access-Accept results to the log file. # # This is only used if "auth = no" # # allowed values: {no, yes} # # auth_accept = no # Log Access-Reject results to the log file. # # This is only used if "auth = no" # # allowed values: {no, yes} # # auth_reject = no # Log passwords with the authentication requests. # auth_badpass - logs password if it's rejected # auth_goodpass - logs password if it's correct # # allowed values: {no, yes} # auth_badpass = no auth_goodpass = no # Log additional text at the end of the "Login OK" messages. # for these to work, the "auth" and "auth_goodpass" or "auth_badpass" # configurations above have to be set to "yes". # # The strings below are dynamically expanded, which means that # you can put anything you want in them. However, note that # this expansion can be slow, and can negatively impact server # performance. # # msg_goodpass = "" # msg_badpass = "" # The message when the user exceeds the Simultaneous-Use limit. # msg_denied = "You are already logged in - access denied" } # The program to execute to do concurrency checks. checkrad = ${sbindir}/checkrad # # ENVIRONMENT VARIABLES # # You can reference environment variables using an expansion like # `$ENV{PATH}`. However it is sometimes useful to be able to also set # environment variables. This section lets you do that. # # The main purpose of this section is to allow administrators to keep # RADIUS-specific configuration in the RADIUS configuration files. # For example, if you need to set an environment variable which is # used by a module. You could put that variable into a shell script, # but that's awkward. Instead, just list it here. # # Note that these environment variables are set AFTER the # configuration file is loaded. So you cannot set FOO here, and # expect to reference it via `$ENV{FOO}` in another configuration file. # You should instead just use a normal configuration variable for # that. # ENV { # # Set environment varable `FOO` to value '/bar/baz'. # # NOTE: Note that you MUST use '='. You CANNOT use '+=' to append # values. # # FOO = '/bar/baz' # # Delete environment variable `BAR`. # # BAR # # `LD_PRELOAD` is special. It is normally set before the # application runs, and is interpreted by the dynamic linker. # Which means you cannot set it inside of an application, and # expect it to load libraries. # # Since this functionality is useful, we extend it here. # # You can set # # LD_PRELOAD = /path/to/library.so # # and the server will load the named libraries. Multiple # libraries can be loaded by specificing multiple individual # `LD_PRELOAD` entries. # # # LD_PRELOAD = /path/to/library1.so # LD_PRELOAD = /path/to/library2.so } # SECURITY CONFIGURATION # # There may be multiple methods of attacking on the server. This # section holds the configuration items which minimize the impact # of those attacks # security { # chroot: directory where the server does "chroot". # # The chroot is done very early in the process of starting # the server. After the chroot has been performed it # switches to the "user" listed below (which MUST be # specified). If "group" is specified, it switches to that # group, too. Any other groups listed for the specified # "user" in "/etc/group" are also added as part of this # process. # # The current working directory (chdir / cd) is left # *outside* of the chroot until all of the modules have been # initialized. This allows the "raddb" directory to be left # outside of the chroot. Once the modules have been # initialized, it does a "chdir" to ${logdir}. This means # that it should be impossible to break out of the chroot. # # If you are worried about security issues related to this # use of chdir, then simply ensure that the "raddb" directory # is inside of the chroot, end be sure to do "cd raddb" # BEFORE starting the server. # # If the server is statically linked, then the only files # that have to exist in the chroot are ${run_dir} and # ${logdir}. If you do the "cd raddb" as discussed above, # then the "raddb" directory has to be inside of the chroot # directory, too. # # chroot = /path/to/chroot/directory # user/group: The name (or #number) of the user/group to run radiusd as. # # If these are commented out, the server will run as the # user/group that started it. In order to change to a # different user/group, you MUST be root ( or have root # privileges ) to start the server. # # We STRONGLY recommend that you run the server with as few # permissions as possible. That is, if you're not using # shadow passwords, the user and group items below should be # set to radius'. # # NOTE that some kernels refuse to setgid(group) when the # value of (unsigned)group is above 60000; don't use group # "nobody" on these systems! # # On systems with shadow passwords, you might have to set # 'group = shadow' for the server to be able to read the # shadow password file. If you can authenticate users while # in debug mode, but not in daemon mode, it may be that the # debugging mode server is running as a user that can read # the shadow info, and the user listed below can not. # # The server will also try to use "initgroups" to read # /etc/groups. It will join all groups where "user" is a # member. This can allow for some finer-grained access # controls. # user = radiusd group = radiusd # Core dumps are a bad thing. This should only be set to # 'yes' if you're debugging a problem with the server. # # allowed values: {no, yes} # allow_core_dumps = no # # max_attributes: The maximum number of attributes # permitted in a RADIUS packet. Packets which have MORE # than this number of attributes in them will be dropped. # # If this number is set too low, then no RADIUS packets # will be accepted. # # If this number is set too high, then an attacker may be # able to send a small number of packets which will cause # the server to use all available memory on the machine. # # Setting this number to 0 means "allow any number of attributes" max_attributes = 200 # # reject_delay: When sending an Access-Reject, it can be # delayed for a few seconds. This may help slow down a DoS # attack. It also helps to slow down people trying to brute-force # crack a users password. # # Setting this number to 0 means "send rejects immediately" # # If this number is set higher than 'cleanup_delay', then the # rejects will be sent at 'cleanup_delay' time, when the request # is deleted from the internal cache of requests. # # As of Version 3.0.5, "reject_delay" has sub-second resolution. # e.g. "reject_delay = 1.4" seconds is possible. # # Useful ranges: 1 to 5 reject_delay = 1 # # status_server: Whether or not the server will respond # to Status-Server requests. # # When sent a Status-Server message, the server responds with # an Access-Accept or Accounting-Response packet. # # This is mainly useful for administrators who want to "ping" # the server, without adding test users, or creating fake # accounting packets. # # It's also useful when a NAS marks a RADIUS server "dead". # The NAS can periodically "ping" the server with a Status-Server # packet. If the server responds, it must be alive, and the # NAS can start using it for real requests. # # See also raddb/sites-available/status # status_server = yes } # PROXY CONFIGURATION # # proxy_requests: Turns proxying of RADIUS requests on or off. # # The server has proxying turned on by default. If your system is NOT # set up to proxy requests to another server, then you can turn proxying # off here. This will save a small amount of resources on the server. # # If you have proxying turned off, and your configuration files say # to proxy a request, then an error message will be logged. # # To disable proxying, change the "yes" to "no", and comment the # $INCLUDE line. # # allowed values: {no, yes} # proxy_requests = no #$INCLUDE proxy.conf # CLIENTS CONFIGURATION # # Client configuration is defined in "clients.conf". # # The 'clients.conf' file contains all of the information from the old # 'clients' and 'naslist' configuration files. We recommend that you # do NOT use 'client's or 'naslist', although they are still # supported. # # Anything listed in 'clients.conf' will take precedence over the # information from the old-style configuration files. # $INCLUDE clients.conf # THREAD POOL CONFIGURATION # # The thread pool is a long-lived group of threads which # take turns (round-robin) handling any incoming requests. # # You probably want to have a few spare threads around, # so that high-load situations can be handled immediately. If you # don't have any spare threads, then the request handling will # be delayed while a new thread is created, and added to the pool. # # You probably don't want too many spare threads around, # otherwise they'll be sitting there taking up resources, and # not doing anything productive. # # The numbers given below should be adequate for most situations. # thread pool { # Number of servers to start initially --- should be a reasonable # ballpark figure. start_servers = 4 # Limit on the total number of servers running. # # If this limit is ever reached, clients will be LOCKED OUT, so it # should NOT BE SET TOO LOW. It is intended mainly as a brake to # keep a runaway server from taking the system with it as it spirals # down... # # You may find that the server is regularly reaching the # 'max_servers' number of threads, and that increasing # 'max_servers' doesn't seem to make much difference. # # If this is the case, then the problem is MOST LIKELY that # your back-end databases are taking too long to respond, and # are preventing the server from responding in a timely manner. # # The solution is NOT do keep increasing the 'max_servers' # value, but instead to fix the underlying cause of the # problem: slow database, or 'hostname_lookups=yes'. # # For more information, see 'max_request_time', above. # max_servers = 8 # Server-pool size regulation. Rather than making you guess # how many servers you need, FreeRADIUS dynamically adapts to # the load it sees, that is, it tries to maintain enough # servers to handle the current load, plus a few spare # servers to handle transient load spikes. # # It does this by periodically checking how many servers are # waiting for a request. If there are fewer than # min_spare_servers, it creates a new spare. If there are # more than max_spare_servers, some of the spares die off. # The default values are probably OK for most sites. # min_spare_servers = 3 max_spare_servers = 3 # When the server receives a packet, it places it onto an # internal queue, where the worker threads (configured above) # pick it up for processing. The maximum size of that queue # is given here. # # When the queue is full, any new packets will be silently # discarded. # # The most common cause of the queue being full is that the # server is dependent on a slow database, and it has received # a large "spike" of traffic. When that happens, there is # very little you can do other than make sure the server # receives less traffic, or make sure that the database can # handle the load. # # max_queue_size = 65536 # Clean up old threads periodically. For no reason other than # it might be useful. # # '0' is a special value meaning 'infinity', or 'the servers never # exit' max_requests_per_server = 0 # Automatically limit the number of accounting requests. # This configuration item tracks how many requests per second # the server can handle. It does this by tracking the # packets/s received by the server for processing, and # comparing that to the packets/s handled by the child # threads. # # If the received PPS is larger than the processed PPS, *and* # the queue is more than half full, then new accounting # requests are probabilistically discarded. This lowers the # number of packets that the server needs to process. Over # time, the server will "catch up" with the traffic. # # Throwing away accounting packets is usually safe and low # impact. The NAS will retransmit them in a few seconds, or # even a few minutes. Vendors should read RFC 5080 Section 2.2.1 # to see how accounting packets should be retransmitted. Using # any other method is likely to cause network meltdowns. # auto_limit_acct = no } ###################################################################### # # SNMP notifications. Uncomment the following line to enable # snmptraps. Note that you MUST also configure the full path # to the "snmptrap" command in the "trigger.conf" file. # #$INCLUDE trigger.conf # MODULE CONFIGURATION # # The names and configuration of each module is located in this section. # # After the modules are defined here, they may be referred to by name, # in other sections of this configuration file. # modules { # # Each module has a configuration as follows: # # name [ instance ] { # config_item = value # ... # } # # The 'name' is used to load the 'rlm_name' library # which implements the functionality of the module. # # The 'instance' is optional. To have two different instances # of a module, it first must be referred to by 'name'. # The different copies of the module are then created by # inventing two 'instance' names, e.g. 'instance1' and 'instance2' # # The instance names can then be used in later configuration # INSTEAD of the original 'name'. See the 'radutmp' configuration # for an example. # # # Some modules have ordering issues. e.g. "sqlippool" uses # the configuration from "sql". In that case, the "sql" # module must be read off of disk before the "sqlippool". # However, the directory inclusion below just reads the # directory from start to finish. Which means that the # modules are read off of disk randomly. # # As of 3.0.18, you can list individual modules *before* the # directory inclusion. Those modules will be loaded first. # Then, when the directory is read, those modules will be # skipped and not read twice. # # $INCLUDE mods-enabled/sql # # As of 3.0, modules are in mods-enabled/. Files matching # the regex /[a-zA-Z0-9_.]+/ are loaded. The modules are # initialized ONLY if they are referenced in a processing # section, such as authorize, authenticate, accounting, # pre/post-proxy, etc. # $INCLUDE mods-enabled/ } # Instantiation # # This section sets the instantiation order of the modules. listed # here will get started up BEFORE the sections like authorize, # authenticate, etc. get examined. # # This section is not strictly needed. When a section like authorize # refers to a module, the module is automatically loaded and # initialized. However, some modules may not be listed in any of the # processing sections, so they should be listed here. # # Also, listing modules here ensures that you have control over # the order in which they are initialized. If one module needs # something defined by another module, you can list them in order # here, and ensure that the configuration will be OK. # # After the modules listed here have been loaded, all of the modules # in the "mods-enabled" directory will be loaded. Loading the # "mods-enabled" directory means that unlike Version 2, you usually # don't need to list modules here. # instantiate { # # We list the counter module here so that it registers # the check_name attribute before any module which sets # it # daily # subsections here can be thought of as "virtual" modules. # # e.g. If you have two redundant SQL servers, and you want to # use them in the authorize and accounting sections, you could # place a "redundant" block in each section, containing the # exact same text. Or, you could uncomment the following # lines, and list "redundant_sql" in the authorize and # accounting sections. # # The "virtual" module defined here can also be used with # dynamic expansions, under a few conditions: # # * The section is "redundant", or "load-balance", or # "redundant-load-balance" # * The section contains modules ONLY, and no sub-sections # * all modules in the section are using the same rlm_ # driver, e.g. They are all sql, or all ldap, etc. # # When those conditions are satisfied, the server will # automatically register a dynamic expansion, using the # name of the "virtual" module. In the example below, # it will be "redundant_sql". You can then use this expansion # just like any other: # # update reply { # Filter-Id := "%{redundant_sql: ... }" # } # # In this example, the expansion is done via module "sql1", # and if that expansion fails, using module "sql2". # # For best results, configure the "pool" subsection of the # module so that "retry_delay" is non-zero. That will allow # the redundant block to quickly ignore all "down" SQL # databases. If instead we have "retry_delay = 0", then # every time the redundant block is used, the server will try # to open a connection to every "down" database, causing # problems. # #redundant redundant_sql { # sql1 # sql2 #} } ###################################################################### # # Policies are virtual modules, similar to those defined in the # "instantiate" section above. # # Defining a policy in one of the policy.d files means that it can be # referenced in multiple places as a *name*, rather than as a series of # conditions to match, and actions to take. # # Policies are something like subroutines in a normal language, but # they cannot be called recursively. They MUST be defined in order. # If policy A calls policy B, then B MUST be defined before A. # ###################################################################### policy { $INCLUDE policy.d/ } ###################################################################### # # Load virtual servers. # # This next $INCLUDE line loads files in the directory that # match the regular expression: /[a-zA-Z0-9_.]+/ # # It allows you to define new virtual servers simply by placing # a file into the raddb/sites-enabled/ directory. # $INCLUDE sites-enabled/ ###################################################################### # # All of the other configuration sections like "authorize {}", # "authenticate {}", "accounting {}", have been moved to the # the file: # # raddb/sites-available/default # # This is the "default" virtual server that has the same # configuration as in version 1.0.x and 1.1.x. The default # installation enables this virtual server. You should # edit it to create policies for your local site. # # For more documentation on virtual servers, see: # # raddb/sites-available/README # ######################################################################