From e8cdba85c48dcbbd42e6fcb5be3aa2912008cb84 Mon Sep 17 00:00:00 2001 From: Emil Renner Berthing Date: Tue, 7 Nov 2017 16:27:49 +0100 Subject: initial commit --- roles/space_server/files/radius/radiusd.conf | 779 +++++++++++++++++++++++++++ 1 file changed, 779 insertions(+) create mode 100644 roles/space_server/files/radius/radiusd.conf (limited to 'roles/space_server/files/radius/radiusd.conf') diff --git a/roles/space_server/files/radius/radiusd.conf b/roles/space_server/files/radius/radiusd.conf new file mode 100644 index 0000000..78990e5 --- /dev/null +++ b/roles/space_server/files/radius/radiusd.conf @@ -0,0 +1,779 @@ +# -*- text -*- +## +## radiusd.conf -- FreeRADIUS server configuration file - 3.0.15 +## +## http://www.freeradius.org/ +## $Id: a83c1f6874e69df8692ebce57174bf0dd52fd502 $ +## + +###################################################################### +# +# Read "man radiusd" before editing this file. See the section +# titled DEBUGGING. It outlines a method where you can quickly +# obtain the configuration you want, without running into +# trouble. +# +# Run the server in debugging mode, and READ the output. +# +# $ radiusd -X +# +# We cannot emphasize this point strongly enough. The vast +# majority of problems can be solved by carefully reading the +# debugging output, which includes warnings about common issues, +# and suggestions for how they may be fixed. +# +# There may be a lot of output, but look carefully for words like: +# "warning", "error", "reject", or "failure". The messages there +# will usually be enough to guide you to a solution. +# +# If you are going to ask a question on the mailing list, then +# explain what you are trying to do, and include the output from +# debugging mode (radiusd -X). Failure to do so means that all +# of the responses to your question will be people telling you +# to "post the output of radiusd -X". + +###################################################################### +# +# The location of other config files and logfiles are declared +# in this file. +# +# Also general configuration for modules can be done in this +# file, it is exported through the API to modules that ask for +# it. +# +# See "man radiusd.conf" for documentation on the format of this +# file. Note that the individual configuration items are NOT +# documented in that "man" page. They are only documented here, +# in the comments. +# +# The "unlang" policy language can be used to create complex +# if / else policies. See "man unlang" for details. +# + +prefix = /usr +exec_prefix = /usr +sysconfdir = /etc +localstatedir = /var +sbindir = /usr/sbin +logdir = ${localstatedir}/log/radius +raddbdir = ${sysconfdir}/raddb +radacctdir = ${logdir}/radacct + +# +# name of the running server. See also the "-n" command-line option. +name = radiusd + +# Location of config and logfiles. +confdir = ${raddbdir} +modconfdir = ${confdir}/mods-config +certdir = ${confdir}/certs +cadir = ${confdir}/certs +run_dir = ${localstatedir}/run/${name} + +db_dir = ${localstatedir}/lib/radiusd + +# +# libdir: Where to find the rlm_* modules. +# +# This should be automatically set at configuration time. +# +# If the server builds and installs, but fails at execution time +# with an 'undefined symbol' error, then you can use the libdir +# directive to work around the problem. +# +# The cause is usually that a library has been installed on your +# system in a place where the dynamic linker CANNOT find it. When +# executing as root (or another user), your personal environment MAY +# be set up to allow the dynamic linker to find the library. When +# executing as a daemon, FreeRADIUS MAY NOT have the same +# personalized configuration. +# +# To work around the problem, find out which library contains that symbol, +# and add the directory containing that library to the end of 'libdir', +# with a colon separating the directory names. NO spaces are allowed. +# +# e.g. libdir = /usr/local/lib:/opt/package/lib +# +# You can also try setting the LD_LIBRARY_PATH environment variable +# in a script which starts the server. +# +# If that does not work, then you can re-configure and re-build the +# server to NOT use shared libraries, via: +# +# ./configure --disable-shared +# make +# make install +# +libdir = /usr/lib64/freeradius + +# pidfile: Where to place the PID of the RADIUS server. +# +# The server may be signalled while it's running by using this +# file. +# +# This file is written when ONLY running in daemon mode. +# +# e.g.: kill -HUP `cat /var/run/radiusd/radiusd.pid` +# +pidfile = ${run_dir}/${name}.pid + +# +# correct_escapes: use correct backslash escaping +# +# Prior to version 3.0.5, the handling of backslashes was a little +# awkward, i.e. "wrong". In some cases, to get one backslash into +# a regex, you had to put 4 in the config files. +# +# Version 3.0.5 fixes that. However, for backwards compatibility, +# the new method of escaping is DISABLED BY DEFAULT. This means +# that upgrading to 3.0.5 won't break your configuration. +# +# If you don't have double backslashes (i.e. \\) in your configuration, +# this won't matter to you. If you do have them, fix that to use only +# one backslash, and then set "correct_escapes = true". +# +# You can check for this by doing: +# +# $ grep '\\\\' $(find raddb -type f -print) +# +correct_escapes = true + +# panic_action: Command to execute if the server dies unexpectedly. +# +# FOR PRODUCTION SYSTEMS, ACTIONS SHOULD ALWAYS EXIT. +# AN INTERACTIVE ACTION MEANS THE SERVER IS NOT RESPONDING TO REQUESTS. +# AN INTERACTICE ACTION MEANS THE SERVER WILL NOT RESTART. +# +# THE SERVER MUST NOT BE ALLOWED EXECUTE UNTRUSTED PANIC ACTION CODE +# PATTACH CAN BE USED AS AN ATTACK VECTOR. +# +# The panic action is a command which will be executed if the server +# receives a fatal, non user generated signal, i.e. SIGSEGV, SIGBUS, +# SIGABRT or SIGFPE. +# +# This can be used to start an interactive debugging session so +# that information regarding the current state of the server can +# be acquired. +# +# The following string substitutions are available: +# - %e The currently executing program e.g. /sbin/radiusd +# - %p The PID of the currently executing program e.g. 12345 +# +# Standard ${} substitutions are also allowed. +# +# An example panic action for opening an interactive session in GDB would be: +# +#panic_action = "gdb %e %p" +# +# Again, don't use that on a production system. +# +# An example panic action for opening an automated session in GDB would be: +# +#panic_action = "gdb -silent -x ${raddbdir}/panic.gdb %e %p 2>&1 | tee ${logdir}/gdb-${name}-%p.log" +# +# That command can be used on a production system. +# + +# max_request_time: The maximum time (in seconds) to handle a request. +# +# Requests which take more time than this to process may be killed, and +# a REJECT message is returned. +# +# WARNING: If you notice that requests take a long time to be handled, +# then this MAY INDICATE a bug in the server, in one of the modules +# used to handle a request, OR in your local configuration. +# +# This problem is most often seen when using an SQL database. If it takes +# more than a second or two to receive an answer from the SQL database, +# then it probably means that you haven't indexed the database. See your +# SQL server documentation for more information. +# +# Useful range of values: 5 to 120 +# +max_request_time = 30 + +# cleanup_delay: The time to wait (in seconds) before cleaning up +# a reply which was sent to the NAS. +# +# The RADIUS request is normally cached internally for a short period +# of time, after the reply is sent to the NAS. The reply packet may be +# lost in the network, and the NAS will not see it. The NAS will then +# re-send the request, and the server will respond quickly with the +# cached reply. +# +# If this value is set too low, then duplicate requests from the NAS +# MAY NOT be detected, and will instead be handled as separate requests. +# +# If this value is set too high, then the server will cache too many +# requests, and some new requests may get blocked. (See 'max_requests'.) +# +# Useful range of values: 2 to 10 +# +cleanup_delay = 5 + +# max_requests: The maximum number of requests which the server keeps +# track of. This should be 256 multiplied by the number of clients. +# e.g. With 4 clients, this number should be 1024. +# +# If this number is too low, then when the server becomes busy, +# it will not respond to any new requests, until the 'cleanup_delay' +# time has passed, and it has removed the old requests. +# +# If this number is set too high, then the server will use a bit more +# memory for no real benefit. +# +# If you aren't sure what it should be set to, it's better to set it +# too high than too low. Setting it to 1000 per client is probably +# the highest it should be. +# +# Useful range of values: 256 to infinity +# +max_requests = 16384 + +# hostname_lookups: Log the names of clients or just their IP addresses +# e.g., www.freeradius.org (on) or 206.47.27.232 (off). +# +# The default is 'off' because it would be overall better for the net +# if people had to knowingly turn this feature on, since enabling it +# means that each client request will result in AT LEAST one lookup +# request to the nameserver. Enabling hostname_lookups will also +# mean that your server may stop randomly for 30 seconds from time +# to time, if the DNS requests take too long. +# +# Turning hostname lookups off also means that the server won't block +# for 30 seconds, if it sees an IP address which has no name associated +# with it. +# +# allowed values: {no, yes} +# +hostname_lookups = no + +# +# Logging section. The various "log_*" configuration items +# will eventually be moved here. +# +log { + # + # Destination for log messages. This can be one of: + # + # files - log to "file", as defined below. + # syslog - to syslog (see also the "syslog_facility", below. + # stdout - standard output + # stderr - standard error. + # + # The command-line option "-X" over-rides this option, and forces + # logging to go to stdout. + # + destination = syslog + + # + # Highlight important messages sent to stderr and stdout. + # + # Option will be ignored (disabled) if output if TERM is not + # an xterm or output is not to a TTY. + # + colourise = yes + + # + # The logging messages for the server are appended to the + # tail of this file if destination == "files" + # + # If the server is running in debugging mode, this file is + # NOT used. + # + file = ${logdir}/radius.log + + # + # Which syslog facility to use, if ${destination} == "syslog" + # + # The exact values permitted here are OS-dependent. You probably + # don't want to change this. + # + syslog_facility = daemon + + # Log the full User-Name attribute, as it was found in the request. + # + # allowed values: {no, yes} + # + stripped_names = no + + # Log authentication requests to the log file. + # + # allowed values: {no, yes} + # + auth = yes + + # Log passwords with the authentication requests. + # auth_badpass - logs password if it's rejected + # auth_goodpass - logs password if it's correct + # + # allowed values: {no, yes} + # + auth_badpass = no + auth_goodpass = no + + # Log additional text at the end of the "Login OK" messages. + # for these to work, the "auth" and "auth_goodpass" or "auth_badpass" + # configurations above have to be set to "yes". + # + # The strings below are dynamically expanded, which means that + # you can put anything you want in them. However, note that + # this expansion can be slow, and can negatively impact server + # performance. + # +# msg_goodpass = "" +# msg_badpass = "" + + # The message when the user exceeds the Simultaneous-Use limit. + # + msg_denied = "You are already logged in - access denied" +} + +# The program to execute to do concurrency checks. +checkrad = ${sbindir}/checkrad + +# SECURITY CONFIGURATION +# +# There may be multiple methods of attacking on the server. This +# section holds the configuration items which minimize the impact +# of those attacks +# +security { + # chroot: directory where the server does "chroot". + # + # The chroot is done very early in the process of starting + # the server. After the chroot has been performed it + # switches to the "user" listed below (which MUST be + # specified). If "group" is specified, it switches to that + # group, too. Any other groups listed for the specified + # "user" in "/etc/group" are also added as part of this + # process. + # + # The current working directory (chdir / cd) is left + # *outside* of the chroot until all of the modules have been + # initialized. This allows the "raddb" directory to be left + # outside of the chroot. Once the modules have been + # initialized, it does a "chdir" to ${logdir}. This means + # that it should be impossible to break out of the chroot. + # + # If you are worried about security issues related to this + # use of chdir, then simply ensure that the "raddb" directory + # is inside of the chroot, end be sure to do "cd raddb" + # BEFORE starting the server. + # + # If the server is statically linked, then the only files + # that have to exist in the chroot are ${run_dir} and + # ${logdir}. If you do the "cd raddb" as discussed above, + # then the "raddb" directory has to be inside of the chroot + # directory, too. + # +# chroot = /path/to/chroot/directory + + # user/group: The name (or #number) of the user/group to run radiusd as. + # + # If these are commented out, the server will run as the + # user/group that started it. In order to change to a + # different user/group, you MUST be root ( or have root + # privileges ) to start the server. + # + # We STRONGLY recommend that you run the server with as few + # permissions as possible. That is, if you're not using + # shadow passwords, the user and group items below should be + # set to radius'. + # + # NOTE that some kernels refuse to setgid(group) when the + # value of (unsigned)group is above 60000; don't use group + # "nobody" on these systems! + # + # On systems with shadow passwords, you might have to set + # 'group = shadow' for the server to be able to read the + # shadow password file. If you can authenticate users while + # in debug mode, but not in daemon mode, it may be that the + # debugging mode server is running as a user that can read + # the shadow info, and the user listed below can not. + # + # The server will also try to use "initgroups" to read + # /etc/groups. It will join all groups where "user" is a + # member. This can allow for some finer-grained access + # controls. + # + user = radiusd + group = radiusd + + # Core dumps are a bad thing. This should only be set to + # 'yes' if you're debugging a problem with the server. + # + # allowed values: {no, yes} + # + allow_core_dumps = no + + # + # max_attributes: The maximum number of attributes + # permitted in a RADIUS packet. Packets which have MORE + # than this number of attributes in them will be dropped. + # + # If this number is set too low, then no RADIUS packets + # will be accepted. + # + # If this number is set too high, then an attacker may be + # able to send a small number of packets which will cause + # the server to use all available memory on the machine. + # + # Setting this number to 0 means "allow any number of attributes" + max_attributes = 200 + + # + # reject_delay: When sending an Access-Reject, it can be + # delayed for a few seconds. This may help slow down a DoS + # attack. It also helps to slow down people trying to brute-force + # crack a users password. + # + # Setting this number to 0 means "send rejects immediately" + # + # If this number is set higher than 'cleanup_delay', then the + # rejects will be sent at 'cleanup_delay' time, when the request + # is deleted from the internal cache of requests. + # + # As of Version 3.0.5, "reject_delay" has sub-second resolution. + # e.g. "reject_delay = 1.4" seconds is possible. + # + # Useful ranges: 1 to 5 + reject_delay = 1 + + # + # status_server: Whether or not the server will respond + # to Status-Server requests. + # + # When sent a Status-Server message, the server responds with + # an Access-Accept or Accounting-Response packet. + # + # This is mainly useful for administrators who want to "ping" + # the server, without adding test users, or creating fake + # accounting packets. + # + # It's also useful when a NAS marks a RADIUS server "dead". + # The NAS can periodically "ping" the server with a Status-Server + # packet. If the server responds, it must be alive, and the + # NAS can start using it for real requests. + # + # See also raddb/sites-available/status + # + status_server = yes + + +} + +# PROXY CONFIGURATION +# +# proxy_requests: Turns proxying of RADIUS requests on or off. +# +# The server has proxying turned on by default. If your system is NOT +# set up to proxy requests to another server, then you can turn proxying +# off here. This will save a small amount of resources on the server. +# +# If you have proxying turned off, and your configuration files say +# to proxy a request, then an error message will be logged. +# +# To disable proxying, change the "yes" to "no", and comment the +# $INCLUDE line. +# +# allowed values: {no, yes} +# +proxy_requests = no +#$INCLUDE proxy.conf + + +# CLIENTS CONFIGURATION +# +# Client configuration is defined in "clients.conf". +# + +# The 'clients.conf' file contains all of the information from the old +# 'clients' and 'naslist' configuration files. We recommend that you +# do NOT use 'client's or 'naslist', although they are still +# supported. +# +# Anything listed in 'clients.conf' will take precedence over the +# information from the old-style configuration files. +# +$INCLUDE clients.conf + + +# THREAD POOL CONFIGURATION +# +# The thread pool is a long-lived group of threads which +# take turns (round-robin) handling any incoming requests. +# +# You probably want to have a few spare threads around, +# so that high-load situations can be handled immediately. If you +# don't have any spare threads, then the request handling will +# be delayed while a new thread is created, and added to the pool. +# +# You probably don't want too many spare threads around, +# otherwise they'll be sitting there taking up resources, and +# not doing anything productive. +# +# The numbers given below should be adequate for most situations. +# +thread pool { + # Number of servers to start initially --- should be a reasonable + # ballpark figure. + start_servers = 5 + + # Limit on the total number of servers running. + # + # If this limit is ever reached, clients will be LOCKED OUT, so it + # should NOT BE SET TOO LOW. It is intended mainly as a brake to + # keep a runaway server from taking the system with it as it spirals + # down... + # + # You may find that the server is regularly reaching the + # 'max_servers' number of threads, and that increasing + # 'max_servers' doesn't seem to make much difference. + # + # If this is the case, then the problem is MOST LIKELY that + # your back-end databases are taking too long to respond, and + # are preventing the server from responding in a timely manner. + # + # The solution is NOT do keep increasing the 'max_servers' + # value, but instead to fix the underlying cause of the + # problem: slow database, or 'hostname_lookups=yes'. + # + # For more information, see 'max_request_time', above. + # + max_servers = 32 + + # Server-pool size regulation. Rather than making you guess + # how many servers you need, FreeRADIUS dynamically adapts to + # the load it sees, that is, it tries to maintain enough + # servers to handle the current load, plus a few spare + # servers to handle transient load spikes. + # + # It does this by periodically checking how many servers are + # waiting for a request. If there are fewer than + # min_spare_servers, it creates a new spare. If there are + # more than max_spare_servers, some of the spares die off. + # The default values are probably OK for most sites. + # + min_spare_servers = 3 + max_spare_servers = 10 + + # When the server receives a packet, it places it onto an + # internal queue, where the worker threads (configured above) + # pick it up for processing. The maximum size of that queue + # is given here. + # + # When the queue is full, any new packets will be silently + # discarded. + # + # The most common cause of the queue being full is that the + # server is dependent on a slow database, and it has received + # a large "spike" of traffic. When that happens, there is + # very little you can do other than make sure the server + # receives less traffic, or make sure that the database can + # handle the load. + # +# max_queue_size = 65536 + + # There may be memory leaks or resource allocation problems with + # the server. If so, set this value to 300 or so, so that the + # resources will be cleaned up periodically. + # + # This should only be necessary if there are serious bugs in the + # server which have not yet been fixed. + # + # '0' is a special value meaning 'infinity', or 'the servers never + # exit' + max_requests_per_server = 0 + + # Automatically limit the number of accounting requests. + # This configuration item tracks how many requests per second + # the server can handle. It does this by tracking the + # packets/s received by the server for processing, and + # comparing that to the packets/s handled by the child + # threads. + # + + # If the received PPS is larger than the processed PPS, *and* + # the queue is more than half full, then new accounting + # requests are probabilistically discarded. This lowers the + # number of packets that the server needs to process. Over + # time, the server will "catch up" with the traffic. + # + # Throwing away accounting packets is usually safe and low + # impact. The NAS will retransmit them in a few seconds, or + # even a few minutes. Vendors should read RFC 5080 Section 2.2.1 + # to see how accounting packets should be retransmitted. Using + # any other method is likely to cause network meltdowns. + # + auto_limit_acct = no +} + +###################################################################### +# +# SNMP notifications. Uncomment the following line to enable +# snmptraps. Note that you MUST also configure the full path +# to the "snmptrap" command in the "trigger.conf" file. +# +#$INCLUDE trigger.conf + +# MODULE CONFIGURATION +# +# The names and configuration of each module is located in this section. +# +# After the modules are defined here, they may be referred to by name, +# in other sections of this configuration file. +# +modules { + # + # Each module has a configuration as follows: + # + # name [ instance ] { + # config_item = value + # ... + # } + # + # The 'name' is used to load the 'rlm_name' library + # which implements the functionality of the module. + # + # The 'instance' is optional. To have two different instances + # of a module, it first must be referred to by 'name'. + # The different copies of the module are then created by + # inventing two 'instance' names, e.g. 'instance1' and 'instance2' + # + # The instance names can then be used in later configuration + # INSTEAD of the original 'name'. See the 'radutmp' configuration + # for an example. + # + + # + # As of 3.0, modules are in mods-enabled/. Files matching + # the regex /[a-zA-Z0-9_.]+/ are loaded. The modules are + # initialized ONLY if they are referenced in a processing + # section, such as authorize, authenticate, accounting, + # pre/post-proxy, etc. + # + $INCLUDE mods-enabled/ +} + +# Instantiation +# +# This section orders the loading of the modules. Modules +# listed here will get loaded BEFORE the later sections like +# authorize, authenticate, etc. get examined. +# +# This section is not strictly needed. When a section like +# authorize refers to a module, it's automatically loaded and +# initialized. However, some modules may not be listed in any +# of the following sections, so they can be listed here. +# +# Also, listing modules here ensures that you have control over +# the order in which they are initialized. If one module needs +# something defined by another module, you can list them in order +# here, and ensure that the configuration will be OK. +# +# After the modules listed here have been loaded, all of the modules +# in the "mods-enabled" directory will be loaded. Loading the +# "mods-enabled" directory means that unlike Version 2, you usually +# don't need to list modules here. +# +instantiate { + # + # We list the counter module here so that it registers + # the check_name attribute before any module which sets + # it +# daily + + # subsections here can be thought of as "virtual" modules. + # + # e.g. If you have two redundant SQL servers, and you want to + # use them in the authorize and accounting sections, you could + # place a "redundant" block in each section, containing the + # exact same text. Or, you could uncomment the following + # lines, and list "redundant_sql" in the authorize and + # accounting sections. + # + # The "virtual" module defined here can also be used with + # dynamic expansions, under a few conditions: + # + # * The section is "redundant", or "load-balance", or + # "redundant-load-balance" + # * The section contains modules ONLY, and no sub-sections + # * all modules in the section are using the same rlm_ + # driver, e.g. They are all sql, or all ldap, etc. + # + # When those conditions are satisfied, the server will + # automatically register a dynamic expansion, using the + # name of the "virtual" module. In the example below, + # it will be "redundant_sql". You can then use this expansion + # just like any other: + # + # update reply { + # Filter-Id := "%{redundant_sql: ... }" + # } + # + # In this example, the expansion is done via module "sql1", + # and if that expansion fails, using module "sql2". + # + # For best results, configure the "pool" subsection of the + # module so that "retry_delay" is non-zero. That will allow + # the redundant block to quickly ignore all "down" SQL + # databases. If instead we have "retry_delay = 0", then + # every time the redundant block is used, the server will try + # to open a connection to every "down" database, causing + # problems. + # + #redundant redundant_sql { + # sql1 + # sql2 + #} +} + +###################################################################### +# +# Policies are virtual modules, similar to those defined in the +# "instantiate" section above. +# +# Defining a policy in one of the policy.d files means that it can be +# referenced in multiple places as a *name*, rather than as a series of +# conditions to match, and actions to take. +# +# Policies are something like subroutines in a normal language, but +# they cannot be called recursively. They MUST be defined in order. +# If policy A calls policy B, then B MUST be defined before A. +# +###################################################################### +policy { + $INCLUDE policy.d/ +} + +###################################################################### +# +# Load virtual servers. +# +# This next $INCLUDE line loads files in the directory that +# match the regular expression: /[a-zA-Z0-9_.]+/ +# +# It allows you to define new virtual servers simply by placing +# a file into the raddb/sites-enabled/ directory. +# +$INCLUDE sites-enabled/ + +###################################################################### +# +# All of the other configuration sections like "authorize {}", +# "authenticate {}", "accounting {}", have been moved to the +# the file: +# +# raddb/sites-available/default +# +# This is the "default" virtual server that has the same +# configuration as in version 1.0.x and 1.1.x. The default +# installation enables this virtual server. You should +# edit it to create policies for your local site. +# +# For more documentation on virtual servers, see: +# +# raddb/sites-available/README +# +###################################################################### -- cgit v1.2.1